|
|
Published Technical Papers and Articles:
- Sherry Robinson, “Nifty New Optics Technologies,”
Innovation: America's Journal of Technology Commercialization , December, 2006. Link to magazine article.
- Steve Williams, Pierre Deny, “Overview of the production of sintered SiC optics and optical sub-assemblies,”
The International Society for Optical Engineering , August, 2005. Copy of submitted article,
Silicon Carbide for Optical Applications Brochure. and
link to ceramics for optical components page.
- Dave Erich, “Hybrid Materials -- The Next Generation for Low Friction and Wear,”
Pump Engineering Magazine , August, 2005. Copy of submitted article and
PolyGlyde™ Material Brochure.
- David A Bath, David Spain, Eric Ness, Steve Williams, Michel Bougoin, “Evaluation of segmented and brazed mirror assemblies,”
The International Society for Optical Engineering , July, 2005. Copy of submitted article,
Silicon Carbide for Optical Applications Brochure. and
link to ceramics for optical components page.
- Rod W. Sidwell and W. Grover Coors, “Thermodynamic limits of electrical efficiency in hydrocarbon fueled SOFC using internal reforming,” Proceeding of the Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX), May 15-20, 2005, Quebec City, Canada, pp.640-648
- W. Grover Coors, “Protonic ceramic fuel cells for high-efficiency operation with methane,”
Journal of Power Sources, 118 150-156 (2003)
- W. Grover Coors, “Development of a protonic ceramic fuel cell at Protonetics,” Proceedings of the 5th European Solid Oxide Fuel Cell Forum, Joep Huijsmans, Editor, Vol.2, 602-607 (2002)
- W.G. Coors and R.C. Swartzlander, “Conductivity measurements in BCY10 by Impedance Spectroscopy,”
26th Risø International Symposium on Materials Science: Solid State Electrochemistry, September 4-8, 2005 (Accepted)
- R.J. Kee, H. Zhu, D.G. Goodwin, R.W. Sidwell and W.G. Coors, “Computational predictions of cell efficiency and fuel utilization as a function of fuel processing and cell voltage,” Proceeding of the
Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX), May 15-20, 2005, Quebec City, Canada, pp.649-658
- T. Schober, W. Grover Coors, “Entry and exit of water vapor in bulk ceramic proton conductors,”
Solid State Ionics, 176, 357-362 (2005)
- W. Grover Coors, “Ceramic fuel cell technology – State of the technology,” Governor’s Technology Summit, State of Colorado, June 3, 2004
- W. Grover Coors, Rod Sidwell and Frank Anderson, “Characterization of electrical efficiency in protonic ceramic fuel cells,” Proceedings of the 6th European Solid Oxide Fuel Cell Forum, Mogens Mogensen, Editor, Vol.1, 117-124 (2004)
- H.J. Kleebe, D. Zhong, E.D. Steffee and W.G. Coors, “Nonoscale microstructure degradation of Y-BaCeO3 under service conditions,”
Euro Ceramics VIII, Key Engineering Materials 264-268 1141-1146 (2004)
- W.G. Coors and D. Zhong, “Differential resistance analysis of protonic ceramic fuel cells for measuring bulk conductivity,”
Solid State Ionics, 162-163 283-290 (2003)
- W.G. Coors and D.W. Readey, “Proton conductivity measurements in yttrium barium cerate by impedance spectroscopy,”
Journal
of American Ceramic Society, 85[11] 2637-2640 (2002)
- W. Grover Coors, “Electrode/electrolyte interface characterization in yttrium-doped BaCeO3 by impedance spectroscopy,” Ph.D. Thesis, Denis W. Ready, Advisor, Colorado School of Mines, March 1, 2001
Contact Information:
CoorsTek Customer Service
+1.800.821.8110 Toll-Free
+1.303.271.7000 Tel
+1.303.271.7009 Fax
|
|
